TOP JN0-335 Valid Test Question - The Best Juniper Security, Specialist (JNCIS-SEC) - Valid Test JN0-335 Tutorial

Rated:

, 0 Comments

Total visits: 7

Posted on: 06/11/25

P.S. Free 2025 Juniper JN0-335 dumps are available on Google Drive shared by ExamPrepAway: https://drive.google.com/open?id=1i0fD8rRUQk24hoHaSSssJseW_j9G8D3o

You should practice with ExamPrepAway Juniper JN0-335 exam questions that are aligned with the latest content of the Juniper JN0-335 test. ExamPrepAway Juniper JN0-335 questions are designed to provide you with the knowledge essential to get certified very quickly. These Juniper exam questions remove the need for you to spend time on unnecessary or irrelevant material, allowing you to complete your JN0-335 Exam Preparation swiftly.

To pass the JN0-335 certification exam, candidates must demonstrate a deep understanding of Juniper Networks security products, as well as the ability to configure and manage these products in real-world scenarios. JN0-335 Exam consists of 65 multiple-choice questions, and candidates must score 65% or higher to pass the exam.

>> JN0-335 Valid Test Question <<

Valid Test JN0-335 Tutorial | JN0-335 Exam Question

The price of the JN0-335 test dumps is quite reasonable, no matter you are the students or the employees of the rnterprise , you can afford it . JN0-335 test dumps are verified by the specialists of the business, therefore the quality is ensured. Pass guarantee and money back guarantee for purchasing the JN0-335 Test Dumps. Other questions or problem of the product can consult the live chat service staff or by email, we will reply you immediately.

Juniper JN0-335 (Security, Specialist (JNCIS-SEC)) certification exam is designed for individuals who have a basic understanding of security technologies and Juniper Networks security appliances. Security, Specialist (JNCIS-SEC) certification exam validates the candidate's knowledge and skills in implementing Juniper Networks security technologies. JN0-335 exam covers a wide range of security technologies, including firewalls, virtual private networks (VPNs), intrusion detection and prevention (IDP), security policies, application security, and Junos security features.

Juniper JN0-335 exam is designed for professionals who wish to validate their skills in the field of Juniper Networks security. The Security, Specialist (JNCIS-SEC) certification is a mid-level certification that focuses on the implementation, configuration, and monitoring of Juniper Networks security technologies. JN0-335 Exam covers various topics such as security policies, VPNs, firewall filters, unified threat management, and intrusion detection and prevention systems. The JN0-335 exam is a comprehensive test that assesses the candidate's knowledge and skills in securing Juniper Networks devices and networks.

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q129-Q134):

NEW QUESTION # 129
Which sequence does an SRX Series device use when implementing stateful session security policies using Layer 3 routes?

A. An SRX Series device conducts an ALG security check on the longest-match route before performing a security policy search.
B. An SRX Series device will perform a security policy search before conducting a longest-match Layer 3 route table lookup.
C. An SRX Series device will conduct a longest-match Layer 3 route table lookup before performing a security policy search.
D. An SRX Series device performs a security policy search before implementing an ALG security check on the longest-match Layer 3 route.

Answer: C

Explanation:
Explanation
A stateful firewall in SRX Series devices keeps track of the state of network connections, distinguishing legitimate packets for different types of connections and allowing only packets that match a known active connection. Sessions are created when a TCP SYN packet is received and permitted by the security policy1.
A security policy is a set of rules that defines how traffic is processed by the SRX Series device. A security policy applies the security rules to the transit traffic within a context (from-zone to to-zone) and each policy is uniquely identified by its name. The traffic is classified by matching the source and destination zones, the source and destination addresses, and the application that the traffic carries in its protocol headers with the policy database in the data plane2.
A Layer 3 route is a path that a packet takes to reach its destination based on the destination IP address. The SRX Series device performs a longest-match Layer 3 route table lookup to determine the next hop for the packet3.
An Application Layer Gateway (ALG) is a software component that provides application-level awareness, security, and control for specific protocols. An ALG inspects the application-layer payload of a packet and modifies it if necessary to allow the application to traverse the SRX Series device. For example, an ALG can rewrite IP addresses and port numbers in the payload of FTP or SIP packets4.
The sequence that an SRX Series device uses when implementing stateful session security policies using Layer 3 routes is as follows3:
The SRX Series device receives a packet and conducts a longest-match Layer 3 route table lookup to determine the next hop for the packet.
The SRX Series device performs a security policy search to find a matching policy for the packet based on the source and destination zones, addresses, and application.
If a matching policy is found, the SRX Series device checks the action of the policy, which can be permit, deny, reject, or tunnel. If the action is permit, the SRX Series device allows the packet to pass through and creates a session for the packet. If the action is deny or reject, the SRX Series device drops the packet and sends an ICMP message to the sender. If the action is tunnel, the SRX Series device encapsulates the packet and forwards it to the tunnel destination.
If the packet requires an ALG, the SRX Series device applies the ALG to the packet and modifies the payload if necessary. The ALG also creates additional sessions for the packet if needed.
The SRX Series device forwards the packet to the next hop based on the routing information.
References:
1: Traffic Processing on SRX Series Firewalls Overview | Junos OS | Juniper Networks
2: Best Practices for Defining Policies on High-End SRX Series Devices - TechLibrary - Juniper Networks
3: [SRX] Example: Configuring TCP SYN Check options on a per-policy basis
4: Application Layer Gateways Overview | Junos OS | Juniper Networks

NEW QUESTION # 130
How does the SSL proxy detect if encryption is being used?

A. It queries the client device.
B. It looks at the destination port number.
C. It uses application identity services.
D. It verifies the length of the packet

Answer: C

Explanation:
Explanation
SSL proxy uses application identification services to dynamically detect if a particular session is SSL encrypted.https://www.juniper.net/documentation/us/en/software/junos/application-identification/topics/topic-ma

NEW QUESTION # 131
You want to use Sky ATP to protect your network; however, company policy does not allow you to send any files to the cloud.
Which Sky ATP feature should you use in this situation?

A. Only use on-box SRX anti-malware file scanning.
B. Only use cloud-based Sky ATP file hash lookups.
C. Only use cloud-based Sky ATP file blacklists.
D. Only use on-premises local Sky ATP server anti-malware file scanning.

Answer: B

NEW QUESTION # 132
How many nodes are configurable in a chassis cluster using SRX Series devices?

A. 0
B. 1
C. 2
D. 3

Answer: B

NEW QUESTION # 133
Click the Exhibit button.

Which two statements describe the output shown in the exhibit? (Choose two.)

A. Redundancy group 1 experienced an operational failure.
B. Redundancy group 1 was administratively failed over.
C. Node 0 is passing traffic for redundancy group 1.
D. Node 1 is passing traffic for redundancy group1.

Answer: B,D

NEW QUESTION # 134
......

Valid Test JN0-335 Tutorial: https://www.examprepaway.com/Juniper/braindumps.JN0-335.ete.file.html

BTW, DOWNLOAD part of ExamPrepAway JN0-335 dumps from Cloud Storage: https://drive.google.com/open?id=1i0fD8rRUQk24hoHaSSssJseW_j9G8D3o

Tags: JN0-335 Valid Test Question, Valid Test JN0-335 Tutorial, JN0-335 Exam Question, JN0-335 Latest Test Answers, JN0-335 Valid Test Testking

Comments

There are still no comments posted ...

Rate and post your comment

Username:
Password:
Forgotten password?

Most Popular

TOP JN0-335 Valid Test Question - The Best Juniper Security, Specialist (JNCIS-SEC) - Valid Test JN0-335 Tutorial

Valid Test JN0-335 Tutorial | JN0-335 Exam Question

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q129-Q134):

Login